Please refer to the main Schedule of Products page for more information.
Devices and Controllers
| Product type | Product scope/application | Specification | Year | Lead Free Applies |
|---|---|---|---|---|
| Meter | Requirements for water meters used to meter the actual volume of cold and heated drinking and non-drinking water flowing through a fully charged closed conduit. Note: Only meters installed within the scope of the PCA require certification. | AS 3565.1 Meters for cold and heated drinking and non-drinking water supplies - Technical requirements | 2010 | Yes |
| Flow sensor | Devices that measure flow or flow and temperature within a water supply system (drinking or non-drinking) | AS 3688 Water supply and gas systems – metallic fittings and end-connectors | 2016 | Yes |
| Flow control valve | Pressure-compensating flow control devices that deliver a fixed and constant flow rate, throughout a given pressure differential range. | WMTS-037.1 Flow controllers – For controlling flows in cold or heated water systems | 2016 | Yes |
| Flow controllers with or without bodies, for use in heated or cold water plumbing systems that may be required to be rated in accordance with AS/NZS 6400. | AS 5200.037.2 Plumbing and drainage products - Flow controllers for use with heated or cold water systems | 2008 | Yes | |
| Grey water diversion device | Grey water diversion devices employing gravity or pumped discharge, designed to be used in the sanitary drainage system to divert grey water. Note: Products that require connection to a water service are outside the scope. | WMTS-460 Grey water diversion device | 2016 | No |
| Rainwater tank connection | Low pressure automated changeover devices of nominal sizes DN15 and DN20 and nominal operating pressure up to and including 400 kPa. *** Lead Free exceptions: changeover devices/connection devices/connection valves in a dedicated service to non-drinking water outlets are excluded from the Lead Free requirements. | WMTS-466 Rainwater tank connection devices | 2016 | Yes (Exceptions: *** are excluded) |
| Automated valves of nominal sizes DN 20/25 and nominal working pressure PN 16. *** Lead Free exceptions: changeover devices/connection devices/connection valves in a dedicated service to non-drinking water outlets are excluded from the Lead Free requirements. | WMTS-467 Rainwater tank connection valve | 2016 | Yes (Exceptions: *** are excluded) | |
| Manual or automated changeover devices of nominal sizes DN 20/25 and maximum allowable operating pressures up to and including 1600 kPa. *** Lead Free exceptions: changeover devices/connection devices/connection valves in a dedicated service to non-drinking water outlets are excluded from the Lead Free requirements. | WMTS-477 Rainwater/mains supply changeover devices | 2016 | Yes (Exceptions: *** are excluded) | |
| Sewer dosing unit | Inline sewer dosing units (SDUs) intended to temporarily store and deliver measured volumes of waste water to the sewer line. | WMTS-499 Inline sewer dosing unit (SDU) | 2016 | No |
| Overflow relief waste outlet | Plastic bodied DN 100 overflow relief waste outlet with integral cap-stopper. | WMTS-498 Plastic Fittings - Overflow relief waste outlet (ORWO) with integral cap-stopper | 2014 | No |
| Anti infiltration device | Moulded PVC-U anti-infiltration overflow-relief devices, of nominal size DN 100, that are intended, upon installation in an overflow relief gully (ORG). | WMTS-501 Anti-infiltration overflow-relief device | 2016 | No |
| Leak protection valve | Metallic bodied safety shut valves for use in hot and cold water applications where the maximum operating pressure does not exceed 1400 kPa and the maximum temperature does not exceed 85ºC. | WMTS-479 Flood stop safety valve | 2020 | Yes |
| Pressure compensating tank |
Pressure-compensating tanks, for use within cold and heated water supply systems incorporating water supply pumps or systems with fluctuating pressures.
| WMTS-485 Pressure compensating tank | 2018 | Yes |
| Prefabricated cold water storage tank | Prefabricated cold water storage tanks constructed from copper, galvanized steel, stainless steel, plastics and dezincification-resistant copper alloy up to 50,000 L capacity installed within a cold water system. Note: This excludes tanks installed outside of the scope of the PCA. | WMTS-026 Cold water storage tanks | 2016 | Yes |
| Rotationally moulded cold water storage tank | Rotationally moulded storage tanks that are manufactured in one-piece, single or multi-layer, seamless construction. The tanks are for non-buried, partially-buried and buried installation and capable of containing water or liquids used in food and beverage manufacture. Note: This excludes tanks installed outside of the scope of the PCA. | AS/NZS 4766 Rotationally moulded buried, partially buried and non-buried storage tanks for water and chemicals
| 2020 | Refer to component standard |
| Water Hammer arrestor | Metal-bodied water hammer arresters of DN 15 to DN 50 sizes for heated (up to 80°C) and cold-water applications and supply pressures up to 1.2 MPa. | AS 5200.007 Metal-bodied water hammer arresters | 2008 | Yes |
| Water meters with integral shut off valve | Inline water meter with an integral shut off valve for installation into a existing service valve. The meter may be installed in cold or hot water service pipelines. A water meter that complies with this standard is intended for installation downstream of the network utility operators property water meter. | WMTS-530 Water meters with integral shut off valve | 2020 | Yes |
| Water conditioner | Metallic or plastic bodied in line or end of line water treatment devices for conditioning of water and prevention of scaling | AS 3497 Drinking water treatment systems - Design and performance requirements | 2021 | Yes |
| Wet well washers | Prefabricated washing device consisting of a rotating arm with included spray nozzles designed specifically for use with wet wells and tanks. These devices are designed to be permanently fixed to the wet well and not portable. | WMTS-533 Wet well washers | 2022 | No |