Please refer to the main Schedule of Products page for more information.

Fittings – Plastic

Product typeProduct scope/applicationSpecificationYearLead Free Applies

Acrylonitrile butadiene styrene (ABS) fittings

 

Solid-wall acrylonitrile-butadiene-styrene (ABS) fittings for soil and waste discharge (low and high temperature) inside buildings, designed for jointing by means of elastomeric sealing rings, solvent cementing or integral dual-purpose sockets.ISO 7682 Plastics piping systems for soil and waste discharge2003No
Cross-linked polyethylene (PE-X) fittingsFittings for use with crosslinked polyethylene (PE-X) for pressure heated and cold water applications.

AS/NZS 2537.2 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X), Part 2: Plastics piping systems for hot and cold water installations – Crosslinked polyethylene(PE-X) – Fittings

Note: See NoD 2017/4.4

2011Yes
Macro composite fittingsMultilayer piping systems for heated and cold water installations inside buildings.

AS 4176.3 Multilayer piping systems for hot and cold water plumbing applications – Fittings

Note: See NoD 2017/4.4

2010Yes
Polybutylene (PB) fittingsMechanical jointing fittings suitable for use as fixed joints with polybutylene plumbing pipes.

AS/NZS 2642.3 Polybutylene (PB) plumbing pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications.

Note: See NoD 2017/4.4

2008Yes

 

Polyethylene (PE) fittings

 

 

Fittings to be used with polyethylene pipe for the conveyance of water and other fluids.AS/NZS 4129 Fittings for polyethylene (PE) pipes for pressure applications2020Yes
Solid-wall polyethylene (PE) fittings for soil and waste discharge (low and high temperature) of DN 32 to 100.

AS/NZS 4401 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)

Note: See NoD 2017/4.4

2006No
Polyethylene (PE) fittings greater than DN 100 for sewerage and drainage applications, intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Including both plain and structured wall fittings.

AS/NZS 5065 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications

Note: See NoD 2017/4.4

2005No

Polypropylene (PP) fittings

 

Polypropylene (PP) fittings greater than DN 100 for sewerage and drainage applications, intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Including both plain and structured wall pipes and fittings.

AS/NZS 5065 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications

Note: See NoD 2017/4.4

2005No
Polypropylene (PP) fittings for soil and waste discharge (low and high temperature). This is applicable to PP fittings, and assemblies fittings, intended to be used for soil and waste discharge pipework for the conveyance of domestic waste waters (low and high temperature) and associated ventilation pipework. Fittings for jointing by means of elastomeric sealing rings or by butt fusion.AS/NZS 7671 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings2010No
Polypropylene (PP) piping systems intended to be used for heated and cold water installations within buildings.ISO 15874-3 Plastic piping systems for hot and cold water installations – Polypropylene (PP) – Fittings
Note: See NoD 2017/4.4
2013Yes
Polypropylene (PP) piping systems intended to be used for heated and cold water installations within buildings.ISO 15874-1 Plastic piping systems for hot and cold water installations – Polypropylene (PP) – General2013Yes
Polyvinyl chloride (PVC) fittingsPVC-U fittings (including gullies and expansion joints) for sewer, drain, waste and vent applications, intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Including plain and structured wall fittings.AS/NZS 1260 PVC-U pipes and fittings for drain, waste and vent applications2017No
PVC fittings for pressure applications where not exposed to direct sunlight.AS/NZS 1477 PVC pipes and fittings for pressure applications2017No
Metric polybutylene (PB) fittings

Mechanical and fusion jointing fittings suitable for use as fixed joints with polybutylene pipes of the following types:

  1. Socket weld fittings.
  2. Electrofusion fittings.
  3. Mechanical fittings.
  4. Fittings with incorporated inserts.
AS 5082.2 Polybutylene (PB) plumbing pipe systems - Metric series - Mechanical and fusion jointing systems2007Yes

Glass-filament-reinforced

thermosetting plastic (GRP) fittings

Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin. Used for pressure and non-pressure drainage and sewerage applications.AS 3571.1 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin - Pressure and non-pressure drainage and sewerage2009No
Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin. For use in pressure and non-pressure water supply applications.AS 3571.2 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin - Pressure and non-pressure water supply2009No
Plastic fittings with noise reductionNoise reduction fittings made of a compound of polypropylene and inert mineral additives for use at intermittent operating temperatures up to 95°C.WMTS-508 Plastics piping systems for soil and waste discharge – with noise reduction characteristics2013No
Plastic waste outletsA plastic waste outlet which may incorporate components made from either plastic or other materials.AS 2887 Plastic waste fittings1993No
Plastic fixture trapsMoulded or fabricated plastic
waste fittings suitable for receiving intermittent liquid discharges at temperatures not exceeding 95°C.
AS 2887 Plastic waste fittings1993No
Soil waste dump fittingsDN 80 or DN 100 plastics-bodied fitting that is utilised as soil waste dump point for mobile toilet waste disposal.WMTS-482 Soil waste dump fitting2016No
Plastic bodied flexible couplingsPlastic bodied couplings up to DN 300 with included elastomeric element that provides limited flexibility and are utilised in non-pressure rigid pipeline systems.WMTS-519 Plastic Bodied Flexible Coupling2024No
Plastic bodied fitting with intermediate flexible jointsPlastics bodied fittings of nominal sizes up to DN 300 with intermediate flexible joints for sewer or drain applications intended to be used where the pipeline is operating under gravity flow and the operating pressure is low.WMTS-055 Plastic fittings – Connectors with flexible intermediate joints for drainage and sewerage applications2024No

Offset pan connectors

 

 

Injected moulded offset pan connectors.
 
WMTS-517 Offset pan connectors2016No
Moulded or fabricated plastic waste fittings used to convey liquids not exceeding 95°C from a fixture to discharge pipework.AS 2887 Plastic waste fittings1993No
PVC-U fittings for sewer drain, waste and vent application intended to be used where the pipeline is operating under gravity flow and the operating pressure is low.AS/NZS 1260 PVC-U pipes and fittings for drain, waste and vent applications.2017No
Plastic waste fittingMoulded or fabricated plastic waste fittings used to convey liquids not exceeding 95°C from a fixture to discharge pipework.AS 2887 Plastic waste fittings1993No
Fixture connector adaptorSmooth bore plastic-bodied fixture connector adaptors with an adjustable offset used to provide flexibility at the point of installing fixtures to the sanitary plumbing system.WMTS-536 Fixture connector adaptor2022No