Please refer to the main Schedule of Products page for more information.
Pipes - Plastic
| Product type | Product scope/application | Specification | Year | Lead Free Applies |
|---|---|---|---|---|
Acrylonitrile butadiene styrene (ABS) pipe
| Acrylonitrile butadiene styrene (ABS) compounds (ABS 120, ABS 140, ABS 160 and ABS 180), pipes for the conveyance of liquids under pressure. | AS/NZS 3518 Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications | 2013 | No |
| Acrylonitrile butadiene styrene (ABS) piping system for the conveyance of water under pressure for use at continuous operating temperatures up to 70°C, allowable operating pressures up to 1600 kPa in sizes ranging from DN 20 to 110 for use with ABS fittings. | WMTS-507 Acrylonitrile Butadiene Styrene (ABS) Piping System with Stainless Steel Lining for Plumbing Water Service Applications | 2014
| No | |
| Cross-linked polyethylene pipe | Cross-linked polyethylene pipes for the conveyance of fluids under pressure including: water, wastewater and slurries. | AS 2492 Cross-linked polyethylene (PE-X) pipes for pressure applications Note: See NoD 2017/4.4 | 2007 | No |
| Macro composite pipe | Multilayer piping systems intended to be used for heated and cold water installations inside buildings. | AS 4176.2 Multilayer piping systems for hot and cold water plumbing applications – pipes Note: See NoD 2017/4.4 | 2010 | No |
| Polybutylene (PB) pipe | Polybutylene pipe of pressure class PN16 up to 28 mm nominal outside diameter for heated and cold water applications. Note: This does not apply to pipes with a wall thickness of less than 1.6 mm. | AS/NZS 2642.2 Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications Note: See NoD 2017/4.4
| 2008 | No |
Polyethylene (PE) pipe
| Polyethylene pipes for the conveyance of fluids under pressure including, but are not restricted to, water, wastewater, slurries. | AS/NZS 4130 Polyethylene (PE) pipes for pressure applications
| 2018 | No |
Solid-wall polyethylene (PE) pipes for soil and waste discharge (low and high temperature) of nominal sizes DN 32 to DN 315 for installation inside buildings Note: Pipework intended to be buried is outside of the scope. | AS/NZS 4401 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE) Note: See NoD 2017/4.4 | 2006 | No | |
| Polyethylene (PE) pipes greater than DN 100 for sewerage and drainage applications, above and below ground, inside and outside of buildings, and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. It includes plain and structured wall pipes. | AS/NZS 5065 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications Note: See NoD 2017/4.4 | 2005 | No | |
Polypropylene (PP) pipe
| Polypropylene (PP) piping systems intended to be used for heated and cold water installations within buildings. | ISO 15874-1 Plastic piping systems for hot and cold water installations – Polypropylene (PP) - General. | 2013 | No |
| Polypropylene (PP) for piping systems intended to be used for heated and cold water installations within buildings. | ISO 15874-2 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Pipes Note: See NoD 2017/4.4 | 2013 | No | |
Solid-wall polypropylene (PP) pipes for soil and waste discharge (low and high temperature) inside buildings. Note: Pipework intended to be buried is outside of the scope. | AS/NZS 7671 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings | 2010 | No | |
| Polypropylene (PP) pipes greater than DN 100 for sewerage and drainage applications intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. It includes plain and structured wall pipes. | AS/NZS 5065 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications Note: See NoD 2017/4.4 | 2005 | No | |
| Polyvinyl chloride (PVC) pipe | PVC pipes for pressure applications. | AS/NZS 1477 PVC pipes and fittings for pressure applications | 2017 | No |
| PVC-U pipes for sewer, drain, waste and vent applications intended to be used where the pipeline is operating under gravity flow and the operating pressure is low, both plain and structured wall pipes. | AS/NZS 1260 PVC-U pipes and fittings for drain, waste and vent applications | 2017 | No | |
| Pipes made of oriented unplasticised polyvinyl chloride (PVC-O). | AS/NZS 4441 Oriented PVC (PVC-O) pipes for pressure applications | 2017 | No | |
| Pipes of PVC-M for the conveyance of water and wastewater under pressure. | AS/NZS 4765 Modified PVC (PVC-M) pipes for pressure applications | 2017 | No | |
| Metric polybutylene (PB) pipe | Polybutylene pipe for heated and cold water applications. | AS 5082.1 Polybutylene (PB) plumbing pipe systems - Metric series - Metric polybutylene (PB) pipes for hot and cold water applications | 2007 | No |
| Glass-filament-reinforced thermosetting plastic (GRP) pipe | Glass-reinforced thermoplastics (GRP) pipes based on unsaturated polyester (UP) resin for pressure and non-pressure drainage and sewerage applications | AS 3571.1 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin - Pressure and non-pressure drainage and sewerage | 2009 | No |
| Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin for pressure and non-pressure water supply applications. | AS 3571.2 Plastics piping systems - Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin - Pressure and non-pressure water supply | 2009 | No | |
| Plastic pipe with noise reduction | Noise reduction pipes made of a compound of polypropylene and inert mineral additives for waste and drainage installations with intermittent operating temperatures up to 95°C. | WMTS-508 Plastics piping systems for soil and waste discharge – with noise reduction characteristics | 2013 | No |